Request Information
For floor mounting.

The maximum length of a roller conveyor with one gear motor is 4.5 m with a maximum payload of 1500 kg.

All sections are supplied with coupling fittings.
Unit of Measure

Specifications

Brands

 N/A SOCO

Pallet Handling Surface Treatment

 N/A Electro galvanized steel with the exception of gear motor, chain, and roller axles. Rollers are electro galvanized with yellow crome.

Frames

 N/A Cold-bend angle profiles bolted to C-profile cross bars with supports.

Conveying Rollers Diameter

 N/A 80 mm

Roller Conveyor

 N/A Electro galvanized steel tubes

Axle Diameter

 N/A 17 mm

Bearings

 N/A 6203 - 2rs

Roller Fittings

 N/A Rollers are suspended between side frames by means of M10 axle.

Payload

 N/A For use up to 1,500 kg load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.

Standard Total Height from Floor to Top of Rollers

 N/A 190 mm

Chain Drive

 N/A Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.

Chain Cover

 N/A Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
Gear Motor1 N/A 0.37 kW
Speed2 N/A 11.4 m/min
Roller Pitch3 N/A 178 mm

Dimensions

Width

 N/A 1370 mm

Length

 N/A 1500 mm

Accessories

Accessories

 N/A Cross Bars for Supports Supports for External Mounting Supports for Internal Mounting

Features

Features

 N/A All sections are supplied with coupling fittings.
  • Silent - minimal friction.
  • Smooth design - no sharp edges.
  • Easy to relocate and extend.

Note

Note

 N/A Subject to alteration.
  • 1 Worm reduction gear sidemounted on conveyor frame.
  • 2 Other speeds available.
  • 3 Distance between the roller centres.