The 2-part roller conveyors make it possible to lead pallets from a roller conveyor in position for collection by hand lift truck.
Please note: Non-driven pallet conveyors require appropriate fencing for personnel security.
Please note: Non-driven pallet conveyors require appropriate fencing for personnel security.
Unit of Measure
Specifications
Brands |
N/A SOCO |
Pallet Handling Surface Treatment |
N/A Electro galvanized steel with the exception of gear motor, chain, and roller axles. Rollers are electro galvanized with yellow crome. |
Frames |
N/A Cold-bend angle profiles bolted to C-profile cross bars with supports. |
Conveying Rollers Diameter |
N/A 80 mm |
Roller Conveyor |
N/A Electro galvanized steel tubes |
Axle Diameter |
N/A 17 mm |
Bearings |
N/A 6203 - 2rs |
Roller Fittings |
N/A Rollers are suspended between side frames by means of M10 axle. |
Payload |
N/A For use up to 1,500 kg load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM. |
Standard Total Height from Floor to Top of Rollers |
N/A 90 mm |
Chain Drive |
N/A Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller. |
Chain Cover |
N/A Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor. |
Roller Pitch1 | N/A 178 mm |
- 1 Distance between the roller centres.