For support mounting only.
Unit of Measure
Specifications
Brands |
N/A SOCO |
Pallet Handling Surface Treatment |
N/A Electro galvanized steel with the exception of gear motor, chain, and roller axles. Rollers are electro galvanized with yellow crome. |
Frames |
N/A Cold-bend angle profiles bolted to C-profile cross bars with supports. |
Conveying Rollers Diameter |
N/A 80 mm |
Roller Conveyor |
N/A Electro galvanized steel tubes |
Axle Diameter |
N/A 17 mm |
Bearings |
N/A 6203 - 2rs |
Roller Fittings |
N/A Rollers are suspended between side frames by means of M10 axle. |
Payload |
N/A For use up to 1,500 kg load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM. |
Standard Total Height from Floor to Top of Rollers |
N/A 190 mm |
Chain Drive |
N/A Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller. |
Chain Cover |
N/A Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor. |
| Gear Motor1 | N/A 0.37 kW |
| Speed2 | N/A 11.4 m/min |
| Roller Pitch3 | N/A 89 mm |
| Minimum Height4 | N/A 255 mm |
- 1 Worm reduction gear sidemounted on conveyor frame.
- 2 Other speeds available.
- 3 Distance between the roller centres.
- 4 Excluding supports
