Item # 485911121, 970 Millimeter (mm) Width, 500 Millimeter (mm) Length, and 89 Millimeter (mm) Roller Pitch Driven Pallet Roller Conveyor with Sub-Mounted Gear Motor On TPC Packaging Solutions, TAPE Products Company

Packaging Equipment > Packaging Equipment > Conveyors and Accessories > 190 Millimeter (mm) Height Driven Pallet Roller Conveyors with Side-Mounted Gear Motor > Item # 485911121

Request Information

For support mounting only.

Unit of Measure

Specifications | Dimensions | Note

Specifications

Brands	N/A SOCO
Pallet Handling Surface Treatment	N/A Electro galvanized steel with the exception of gear motor, chain, and roller axles. Rollers are electro galvanized with yellow crome.
Frames	N/A Cold-bend angle profiles bolted to C-profile cross bars with supports.
Conveying Rollers Diameter	N/A 80 mm
Roller Conveyor	N/A Electro galvanized steel tubes
Axle Diameter	N/A 17 mm
Bearings	N/A 6203 - 2rs
Roller Fittings	N/A Rollers are suspended between side frames by means of M10 axle.
Payload	N/A For use up to 1,500 kg load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.
Standard Total Height from Floor to Top of Rollers	N/A 190 mm
Chain Drive	N/A Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.
Chain Cover	N/A Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
Gear Motor¹	N/A 0.37 kW
Speed²	N/A 11.4 m/min
Roller Pitch³	N/A 89 mm
Minimum Height⁴	N/A 255 mm

Dimensions

Width	N/A 970 mm
Length	N/A 500 mm

Note

Note

N/A Subject to alteration.

¹ Worm reduction gear sidemounted on conveyor frame.
² Other speeds available.
³ Distance between the roller centres.
⁴ Excluding supports