Request Information
For coupling of driven conveyors.

The 2-part roller conveyors make it possible to lead pallets from a roller conveyor in position for collection by hand lift truck.

Available with right mounted gear motor and with or without capacitive sensor at pick-up end.
Unit of Measure

Specifications

Brands

 N/A SOCO

Pallet Handling Surface Treatment

 N/A Electro galvanized steel with the exception of gear motor, chain, and roller axles. Rollers are electro galvanized with yellow crome.

Frames

 N/A Cold-bend angle profiles bolted to C-profile cross bars with supports.

Conveying Rollers Diameter

 N/A 80 mm

Roller Conveyor

 N/A Electro galvanized steel tubes

Axle Diameter

 N/A 17 mm

Bearings

 N/A 6203 - 2rs

Roller Fittings

 N/A Rollers are suspended between side frames by means of M10 axle.

Payload

 N/A For use up to 1,500 kg load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.

Standard Total Height from Floor to Top of Rollers

 N/A 90 mm

Chain Drive

 N/A Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.

Chain Cover

 N/A Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
Gear Motor1 N/A 0.37 kW
Speed2 N/A 11.4 m/min
Roller Pitch3 N/A 89 mm

Motor Mounted

 N/A Right Side

Dimensions

Width

 N/A 970 mm

Length

 N/A 1500 mm

Note

Note

 N/A Subject to alteration.
  • 1 Worm reduction gear sidemounted on conveyor frame.
  • 2 Other speeds available.
  • 3 Distance between the roller centres.