Request Information
Plate bedding is recommended for short conveyors or for transport of light items.

Plate bedding with grooves is used for conveyors where width and length are identical or where the conveyor is loaded from the side.
Unit of Measure

Specifications

Brands

 N/A SOCO

Conveying Tubes Diameter

 N/A 48 mm

Conveying Tubes Material

 N/A Impact Proof Plastic

Drive Unit

 N/A 0.12 kW0.37 kW
Standard Conveying Gear (40:1)1 N/A 10 m/min

Frames

 N/A Electro-Galvanized Steel

Dimensions

Width

 N/A 200 mm

Length

 N/A 1500 mm

Accessories

Accessories

 N/A Grip Belts for Belt Conveyors Smooth Belts for Belt Conveyors Supports for Belt Conveyors and Driven Roller Conveyors

Features

Features

 N/A If the motor needs to be mounted on the left side, this must be stated upon ordering.
  • The construction makes the conveyors ideal for new as well as existing systems.
  • Low noise level and smooth surfaces.
An economical solution for long-distance transportation.

Additional Information

Additional Information

 N/A Ordering
First choose a conveyor of the desired length and width. Then choose a belt of a corresponding length and width.

Conveyors with grooved plate bedding always require belts with guide profile.

Note

Note

 N/A As standard, the motor is fitted on the right side of the belt conveyor seen in the direction of travel.

Subject to alteration.
  • 1 Other gearings available. A frequency control system can be connected direct to the 3-phase motor.