Request Information
The Vertrod BS impulse sealer is designed for making extra long heat seals, sealing high-temperature materials, and sealing very thick or multiple layers of various films and laminates. Some high-temperature films that can be sealed are Nylon, Aclar, Tedlar, Teflon, and Urethane Film. Very wide gusseted polyethylene tubing, each layer up to 10 mils thick, can also be sealed on the Vertrod BS, our highest pressure impulse bar sealer.
Unit of Measure

Brands

 N/A Rollbag™ Systems

Seal Length

 N/A 60 in72 in84 in96 in108 in120 in132 in144 in

Seal Width

 N/A 1/4 in

Minimum Air Requirement

 N/A 100 psi

Voltage

 N/A 230 V

Phase

 N/A 1

Warranty

 N/A 3 Year Limited Warranty

Origin

 N/A Made in United States of America (USA)

Thickness

 N/A 10 mil

N/A

Additional Information

 N/A The welded rectangular steel tubular frame provides the structural stability necessary to make seals at high pressure up to 144" in length and up to 1" in width. Films can be fed from the front or back of the machine and passed between the sealing jaws for an uninterrupted flow with the open back design.

The Vertrod BS impulse sealer is made in the USA and includes a 3-year limited warranty.
  • Single side heater bar with opposing pressure bar (bottom jaw heated).
  • Direct drive vertical jaw motion for increased sealing pressure capability.
  • Time-based thermal impulse sealing system.
  • Independent Seal and Cool timers from 0 to 3.75 seconds (0.25 second increments).
  • Open-back feed through style with 2.25" jaw opening.
  • Incrementally adjustable top jaw for precise alignment along sealing length.
  • Welded structural steel frame construction with leveling pads that allow for anchoring machine.
  • Pneumatic low-pressure jaw close safety system with release if obstruction is detected.
  • Safety switch indication lights for precise, easy positioning of heat/high pressure engagement.
  • Foot pedal cycle activation.