TPC Packaging Solutions
TPC Packaging Solutions
Phone: (513) 489-8840
Toll Free: (800) 543-4930
Fax: (513) 489-4616
Website: https://tpcpack.com/
Headquarters
11630 Deerfield Rd.
Cincinnati, OH 45242
Illinois
1401 Davey Road. Suite 800
Woodridge, IL 60517
Florida
7803 Southland Blvd, Suite 204
Orlando, FL 32809
Texas
901 Parkway Dr
Grand Prairie, TX 75051
Print Back
The HP-3200 is All Electric No air requirement or noisy air compressors.

A unique patented fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns.
Unit of Measure

Specifications

Brands

 N/A Cousins

Production Speed

 N/A 1 to 40 loads/hr

Note for Production Speed

 N/A Process rates will vary with load size, number of wraps & forklift load/unload time.

Turntable Octagonal Size

 N/A 52 in

Load Capacity

Maximum Dynamic Load Weight

 N/A 4500 lb

Maximum Static Load Weight

 N/A 10000 lb

Maximum Load Width

 N/A 50 in

Maximum Load Length

 N/A 50 in

Maximum Diagonal Load Size

 N/A 71 in
Maximum Load Height1 N/A 80 in

Minimum Load Width

 N/A 30 in

Minimum Load Length

 N/A 30 in

Minimum Load Height

 N/A 24 in

Turntable

Turntable

 N/A
  • 52" octagonal 5/16" thick formed steel plate turntable.
  • 4 point caster support system.
  • Turntable height less than 12" from floor.
  • ANSI #50 direct chain drive c/w chain tensioner.
  • 3-12 RPM rotational speed c/w soft start acceleration.
  • 1/2 HP AC variable speed motor.
  • Final revolution deceleration and positive stop alignment.
  • Front & back forklift ports for easy movement.

Film Carriage Elevator

Film Carriage Elevator

 N/A
  • 1/2 HP AC variable speed motor.
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device.
  • Maintenance free carriage guidance system.

Film Delivery System

Film Delivery System

 N/A
  • NEW Super Rapid Thread II ™ 20" capacity pre-stretch film carriage.
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP AC variable speed motor.
  • Fully electronic dynamic dancer corner compensation.
  • 33% to 313% fixed stretch capability.
  • Pre-stretch ratio variable using easy sprocket change.
  • Carriage Descent Obstruction Safety Shut-Off Device.
  • Rapid Thread ™ Safety Door with auto power cut-off switch.
  • Side mounted film carriage for operator convenience and safety.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers.

Electrical Input Requirements

Voltage

 N/A 115 V

Phase

 N/A 1

Frequency

 N/A 60 Hz

Current

 N/A 15 A

Automation Features

Automation Features

 N/A
  • "All Electric - No Pneumatics Required".
  • Electro-mechanically actuated film clamp mechanism.
  • Electro-mechanically actuated film tail cut/wipe arm mechanism.
  • Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle.

Controls

Control Features

 N/A
  • Panasonic PLC with Touchscreen Operator Interface.
  • Power Off - On - Reset switch & Power On indicator light.
  • Single button Auto Wrap Cycle Start/Pause.
  • Cycle Pause for applying top sheets.
  • Reinforce Wrap control for mid-wrapping.
  • Emergency Stop button.
  • Turntable Jog button.
  • Film Carriage Lower & Raise buttons.
  • Film Clamp Open/Close button.
  • Film tension (Force-to-Load) control.
  • Separate film carriage raise & lower speed controls.
  • Variable turntable speed control.
  • Triple beam auto load height sensing photo-eye, detects dark or shiny loads.
  • Separate 1 to 12 revolution top & bottom wrap control.
  • Selectable Reduced Bottom Film Force parameter for wrapping bottom of load.
  • A - B - C Wrap Program selector with capability to input and store unique wrapping parameters for each program.
  • Wireless remote start/stop control – optional lanyard, pendant or pedestal control station available.
  • NEMA 12 control panel enclosure.
  • Non-proprietary UL/CSA approved components.

Structural Features

Structural Features

 N/A
  • All structural steel construction.
  • Forklift truck portable base structure design - lifting tubes included for front and rear access.
  • Structural steel tube machine tower with sheet metal covers.
  • Electro-static powder coated
  • 1 Plus up to 4" top overlap.