TPC Packaging Solutions
TPC Packaging Solutions
Phone: (513) 489-8840
Toll Free: (800) 543-4930
Fax: (513) 489-4616
Website: https://tpcpack.com/
Headquarters
11630 Deerfield Rd.
Cincinnati, OH 45242
Illinois
1401 Davey Road. Suite 800
Woodridge, IL 60517
Florida
7803 Southland Blvd, Suite 204
Orlando, FL 32809
Texas
901 Parkway Dr
Grand Prairie, TX 75051
Print Back
A unique patented fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns.
Unit of Measure

Specifications

Brands

 N/A Cousins

Production Speed

 N/A 1 to 40 loads/hr

Note for Production Speed

 N/A Process rates will vary with load size, number of wraps & forklift load/unload time.

Maximum Static Load Weight

 N/A 4500 lb

Maximum Dynamic Load Weight

 N/A 10000 lb

Maximum Load Width to Remain Inboard of the Turntable

 N/A 48 in

Maximum Load Length to Remain Inboard of the Turntable

 N/A 48 in

Maximum Load Diagonal Size to Remain Inboard of the Turntable

 N/A 68 in

Note for Load Capacity

 N/A Maximum load heigh: plus up to 4" top overlap.

Turntable Octagonal Size

 N/A 48 in

Load Capacity

Maximum Load Length

 N/A 67 in

Maximum Load Width

 N/A 67 in

Maximum Load Height

 N/A 75 in

Diagonal Load Size

 N/A 96 in

Electrical Input Requirements

Control Panel Voltage

 N/A 115 V

Control Panel Phase

 N/A 1

Control Panel Frequency

 N/A 60 Hz

Control Panel Current

 N/A 15 A

Controls

Controls

 N/A
  • Electronic controls with LCD operator interface.
  • Power Off - On - Reset switch & Power On indicator light.
  • Single button Auto Wrap Cycle Start/Pause.
  • Cycle Pause for applying top sheets.
  • Reinforce Wrap control for mid-wrapping.
  • Emergency Stop button.
  • Turntable Jog button.
  • Film Carriage Lower & Raise buttons.
  • Film tension (Force-to-Load) control.
  • Separate film carriage raise & lower speed controls.
  • Operator programmable turntable speed control.
  • Triple beam auto load height sensing photo-eye, detects dark or shiny loads.
  • Separate 1 to 12 revolution top & bottom wrap control.
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load.
  • A - B - C Wrap Program selector with capability to input and store unique wrapping parameters for each program.
  • Wireless remote start/stop control - optional lanyard, pendant or pedestal control station available.
  • 3 wrap modes: automatic spiral wrapping/automatic top banding/semi-automatic.
  • 3 machines in one!.

Turntable

Turntable

 N/A
  • 48" octagonal 5/16" thick formed steel plate turntable.
  • 4 point caster support system.
  • Turntable height less than 11" from floor.
  • ANSI # 50 direct chain drive c/w chain tensioner.
  • 3-12 RPM rotational speed c/w soft start acceleration.
  • 1/2 HP AC variable speed motor.
  • Final revolution deceleration and positive stop alignment.
  • Front & back forklift ports for easy movement.
  • Accu-Count exact turntable positioning system for additional film savings!

Film Carriage Elevator

Film Carriage Elevator

 N/A
  • 1/2 HP AC variable speed motor.
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device.
  • Maintenance free carriage guidance system.

Film Delivery System

Film Delivery System

 N/A
  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage.
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load..
  • 1/2 HP AC variable speed motor.
  • Fully electronic dynamic dancer corner compensation.
  • 33% to 313% fixed stretch capability.
  • Pre-stretch ratio variable using easy sprocket change.
  • Carriage Descent Obstruction Safety Shut-Off Device.
  • Rapid Thread ™ Safety Door with auto power cut-off switch.
  • Side mounted film carriage for operator convenience and safety.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers.

Automation Features

Automation Features

 N/A
  • "All Electric - No Pneumatics Required".
  • "Patent Pending" Cousins exclusive patent pending A-Arm film cut and hold device starts and ends the wrap process at the top of the load. This uniquely different approach to attaching and cutting the stretch film provides you with these benefits:.
  • Selectable top banding capability.
  • Stabilizes the load early in the wrap cycle.
  • Places the ending film tail at the top of the load instead of the bottom.
  • There is no film clamp on the turntable that can be damaged by debris or operator error - also eliminates the need for slip-rings to supply power onto the turntable for less maintenance.
  • Load placement on the turntable is not critical.
  • No air hook-ups or noisy compressors.
  • Automatic First Revolution Load Scanning Safety Feature detects uneven or partial stacked top layers and automatically adjusts A-Arm height clear of obstructions.
  • A-Arm Anti-Fall Safety Device.

Structural Features

Structural Features

 N/A
  • All structural steel construction.
  • Forklift truck portable base structure design - lifting tubes included for front and rear access.
  • Structural steel tube machine tower with sheet metal covers.
  • Electro-static powder coated