Print Back
Customized Stretch Wrappers with Advanced Technology since 1994.

FILM TAIL TREATMENT - ALL ELECTRIC:
  • Electric actuated film clamp mechanism.
  • Electro-mechanically actuated film tail cut/wiper arm mechanism.
  • Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle.
Unit of Measure

Specifications

Brands

N/A Cousins

Production Speed

Production Speed

N/A 40 loads/hr

Note for Production Speed

N/A Depending on load sizes and number of wraps.

Load Capacity

Maximum Load Capacity

N/A 4000 lb

Maximum Load Length

N/A 48 in

Maximum Load Width

N/A 48 in

Maximum Load Height

N/A 75 in

Minimum Load Height

N/A 24 in

Note for Load Capacity

N/A Larger load size options are available.

Conveyors

Rollers Diameter on 3 Inch (in) Centers

N/A 2.5 in

Effective Roller Width

N/A 50 in

Conveyors Standard Passline Height

N/A 16.5

Conveyors

N/A Alternating Current (AC) Drives.

Controls

Controls

N/A
  • LCD operator interface with diagnostics.
  • Separate up/down spiral speed controls.
  • 3 Separate wrap programs.
  • Selectable reduced film tension parameters for wrapping top and/or bottom of light loads.
  • Emergency stop button.
  • NEMA 12
  • 3 year warranty on components.

Film Carriage Elevator

Film Carriage Elevator

N/A
  • Super Rapid Thread II™ 20" capacity pre-stretch film carriage.
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside on the load.
  • AC variable speed motor.
  • 33% to 313% fixed stretch capability.
  • Carriage Descent Safety Shut-Off Device.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers.

Tower Design

Tower Design

N/A
  • Fully enclosed & guarded motors.
  • No exposed cables.
  • Heavy-duty formed/structural steel.
  • Electro-static powder coated paint finish.
  • 5 year warranty on steel fabrications.

Additional Information

Additional Information

N/A Film Carriage - Less film slippage means more consistent stretch and the "sticky" side of the film will always be against both the rubber rollers and the load where it belongs..

All Electric - no pneumatic lines or noisy air compressors required.

System Configuration - Designed to be installed with existing product flow and conveyor layout design. Whether In-line or off-line, the automation package is designed to be in-line with conveyors using interface relays/logic or off-line standalone system using a wireless remote.