| Items |
HP-3200
Model HP-3200 High Profile Platform Automatic Stretch Wrapper
|
LP-3200
Model LP-3200 Low Profile Platform Automatic Stretch Wrapper
|
|
Description
|
N/A
The HP-3200 is All Electric No air requirement or noisy air compressors.
A unique patented fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns.
|
N/A
The LP-3200 can be used with forklifts and pallet jacks (requires air).
|
|
Brands
|
N/A
Cousins
|
|
Production Speed
|
N/A
1 to 40 loads/hr
|
N/A
|
|
Note for Production Speed
|
N/A
Process rates will vary with load size, number of wraps & forklift load/unload time.
|
N/A
|
|
Maximum Dynamic Load Weight
|
N/A
4500 lb
|
N/A
|
|
Maximum Static Load Weight
|
N/A
10000 lb
|
N/A
|
|
Maximum Load Width
|
N/A
50 in
|
N/A
|
|
Maximum Load Length
|
N/A
50 in
|
N/A
|
|
Maximum Diagonal Load Size
|
N/A
71 in
|
N/A
|
|
Maximum Load Height1
|
N/A
80 in
|
N/A
|
|
Minimum Load Width
|
N/A
30 in
|
N/A
|
|
Minimum Load Length
|
N/A
30 in
|
N/A
|
|
Minimum Load Height
|
N/A
24 in
|
N/A
|
|
Turntable Octagonal Size
|
N/A
52 in
|
N/A
|
|
Turntable
|
N/A
- 52" octagonal 5/16" thick formed steel plate turntable.
- 4 point caster support system.
- Turntable height less than 12" from floor.
- ANSI #50 direct chain drive c/w chain tensioner.
- 3-12 RPM rotational speed c/w soft start acceleration.
- 1/2 HP AC variable speed motor.
- Final revolution deceleration and positive stop alignment.
- Front & back forklift ports for easy movement.
|
N/A
|
|
Film Carriage Elevator
|
N/A
- 1/2 HP AC variable speed motor.
- ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device.
- Maintenance free carriage guidance system.
|
N/A
|
|
Film Delivery System
|
N/A
- NEW Super Rapid Thread II ™ 20" capacity pre-stretch film carriage.
- Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
- 1/2 HP AC variable speed motor.
- Fully electronic dynamic dancer corner compensation.
- 33% to 313% fixed stretch capability.
- Pre-stretch ratio variable using easy sprocket change.
- Carriage Descent Obstruction Safety Shut-Off Device.
- Rapid Thread ™ Safety Door with auto power cut-off switch.
- Side mounted film carriage for operator convenience and safety.
- Superior film-to-roller contact area.
- Lifetime warranty on pre-stretch rollers.
|
N/A
|
|
Voltage
|
N/A
115 V
|
N/A
|
|
Phase
|
N/A
1
|
N/A
|
|
Frequency
|
N/A
60 Hz
|
N/A
|
|
Current
|
N/A
15 A
|
N/A
|
|
Automation Features
|
N/A
- "All Electric - No Pneumatics Required".
- Electro-mechanically actuated film clamp mechanism.
- Electro-mechanically actuated film tail cut/wipe arm mechanism.
- Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle.
|
N/A
|
|
Controls
|
N/A
- Panasonic PLC with Touchscreen Operator Interface.
- Power Off - On - Reset switch & Power On indicator light.
- Single button Auto Wrap Cycle Start/Pause.
- Cycle Pause for applying top sheets.
- Reinforce Wrap control for mid-wrapping.
- Emergency Stop button.
- Turntable Jog button.
- Film Carriage Lower & Raise buttons.
- Film Clamp Open/Close button.
- Film tension (Force-to-Load) control.
- Separate film carriage raise & lower speed controls.
- Variable turntable speed control.
- Triple beam auto load height sensing photo-eye, detects dark or shiny loads.
- Separate 1 to 12 revolution top & bottom wrap control.
- Selectable Reduced Bottom Film Force parameter for wrapping bottom of load.
- A - B - C Wrap Program selector with capability to input and store unique wrapping parameters for each program.
- Wireless remote start/stop control – optional lanyard, pendant or pedestal control station available.
- NEMA 12 control panel enclosure.
- Non-proprietary UL/CSA approved components.
|
N/A
|
|
Structural Features
|
N/A
- All structural steel construction.
- Forklift truck portable base structure design - lifting tubes included for front and rear access.
- Structural steel tube machine tower with sheet metal covers.
- Electro-static powder coated
|
N/A
|
|
Note
|
N/A
|
N/A
The LP-3200 can be used with forklifts and pallet jacks (requires air).
|
