Request Information
  • Design features/adjustments that eliminate film breaks reducing downtime.
  • A quality machine built with quality components and supported by a local qualified distributor.
Unit of Measure

Specifications

Brands

 N/A Cousins

Production Speed

Production Speed

 N/A 1 to 65 loads/hr

Note for Production Speed

 N/A Process rates will vary with load size, number of wraps & conveyor speed.

Load Capacity

Maximum Load Capacity

 N/A 4000 lb

Maximum Load Length

 N/A 52 in

Maximum Load Width

 N/A 52 in

Maximum Load Height

 N/A 80 in

Minimum Load Height

 N/A 24 in

Note for Load Capacity

 N/A Larger load size options are available.

Conveyors

Rollers Diameter on 3 Inch (in) Centers

 N/A 2.5 in

Effective Roller Width

 N/A 54 in

Conveyors Standard Passline Height

 N/A 18

Conveyors

 N/A Standard system includes 5' infeed and 5' outfeed powered conveyors.

Film Carriage Elevator

Film Carriage Elevator

 N/A
  • Super Rapid Thread II pre-stretch film carriage.
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside on the load.
  • 1/2 HP DC variable speed motor.
  • 33% to 313% fixed stretch capability.
  • Carriage Descent Safety Shut-Off Device.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers.

Controls

Controls

 N/A
  • Allen-Bradley MicroLogix 1400 PLC HMI touchscreen operator interface panel.
  • Wrap bypass mode selector switch.
  • Separate film carriage elevator raise & lower speed controls.
  • Separate 1 to 12 revolution top & bottom wrap control.
  • Broken film/out of film detection c/w automatic machine reset and fault beacon light.
  • Rotary arm and film carriage elevator dynamic braking.
  • NEMA 12 control panel and junction boxes Dust tight slip ring assembly.
  • Non-proprietary UL/CSA approved components.
  • 3 Year Warranty on components.

Turntable/Tower Design

Turntable/Tower Design

 N/A
  • Heavy-duty ring bearing - gear/pinion drive 1 - 20 RPM 3 HP DC variable speed motor.
  • Dust tight slip ring assembly.
  • Final revolution deceleration and positive stop alignment.
  • Heavy-Duty Formed/Structural Steel.
  • Electro-static powder coated paint finish.
  • 5 Year Warranty on Steel Fabrications

Features

Features

 N/A
  • Stacked lights monitor system operation and faults.
  • PLC: A/B MicroLogix 1400.
  • Safety rail fencing with interlocked gate.
  • Long lasting electro-static powder coat paint process.
  • Soft start VAC controls and automatic load staging photo-eyes.
  • Ring gear bearing turntable support.
  • Super Rapid Thread II power pre-stretch film carriage.
  • HD structural steel construction.

Additional Information

Additional Information

 N/A Your system can be equipped with any device that the application requires
  • Additional Conveyors
  • Automatic Top Sheet Dispensers
  • Top Platen/Hold Down Device
  • 90º Transfers
  • Heat Seal Device to Secure Film Tails
  • Turntables
  • Frame Extensions for Larger Load Sizes
  • Non-standard PLC/Controls
  • Lifting Device to Wrap Under Pallet
  • Scales