Request Information
The 4100-45 Conveyorized Automatic up to 45 loads per hour.
  • Design features/adjustments that eliminate film breaks reducing downtime.
  • A quality machine built with quality components and supported by a local qualified distributor.
Unit of Measure

Specifications

Brands

 N/A Cousins

Production Speed

Production Speed

 N/A 1 to 45 loads/hr

Note for Production Speed

 N/A Process rates will vary with load size, number of wraps & conveyor speed.

Load Capacity

Maximum Load Capacity

 N/A 4000 lb

Maximum Load Length

 N/A 50 in

Maximum Load Width

 N/A 50 in

Maximum Load Height

 N/A 80 in

Minimum Load Height

 N/A 24 in

Note for Load Capacity

 N/A Larger load size options are available.

Conveyors

Rollers Diameter on 3 Inch (in) Centers

 N/A 2.5 in

Effective Roller Width

 N/A 54 in

Conveyors

 N/A Standard system includes 5' infeed, 11' process and 5' outfeed conveyors.

Controls

Controls

 N/A
  • PANASONIC FP-X Programmable Logic Controller (PLC).
  • HMI touchscreen operator interface Panel.
  • Wrap bypass mode selector switch.
  • Separate film carriage elevator raise & lower speed controls.
  • Separate 1 to 12 revolution top & bottom wrap control.
  • Broken film/out of film detection c/w automatic machine reset and fault beacon light.
  • Rotary arm and film carriage elevator dynamic braking.
  • NEMA 12 control panel and junction boxes.
  • Dust tight slip ring assembly.
  • Non-proprietary UL/CSA approved components.
  • 3 year warranty on components.

Film Carriage Elevator

Film Carriage Elevator

 N/A
  • Super Rapid Thread II pre-stretch film carriage.
  • Safety door with auto cut-off switch.
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside on the load.
  • 1/2 HP DC variable speed motor.
  • 33% to 313% fixed stretch capability.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers.

Arm/Tower Design

Arm/Tower Design

 N/A
  • Double flange bearing support system
    • Twin V-belt drive pulleys with belt tensioner
    • 1 - 14 RPM rotational speed c/w soft start acceleration
    • 1/2 HP DC variable speed motor
  • Dust tight slip ring assembly.
  • Final revolution deceleration and positive stop alignment.
  • Heavy-Duty Formed/Structural Steel .
  • Electro-static powder coated paint finish.
  • 5 Year Warranty on Steel Fabrications.

Features

Features

 N/A
  • Twin "V" belt drive assembly double flange bearing support Speed 1 to 14 RPM.
  • Stack-light allows operators to monitor system operation and faults.
  • PANASONIC FP-X PLC with HMI Touchscreen Operator Interface.
  • Long lasting electro-static powder coat paint process.
  • "Super Rapid Thread II"pre-stretch film carriage.
  • 4000# rated conveyor at 18" high 2.5" dia. rollers on 3" centers 54" effective width with soft start VAC controls and auto staging photo-eyes.
  • 72" H safety fence with operator access interlocked gate
  • HD structural steel tube frame.

Additional Information

Additional Information

 N/A Your system can be equipped with any device that the application requires
  • Additional Conveyors
  • Automatic Top Sheet Dispensers
  • Top Platen/Hold Down Device
  • 90º Transfers
  • Heat Seal Device to Secure Film Tails
  • Turntables
  • Frame Extensions for Larger Load Sizes
  • Non-standard PLC/ Controls
  • Lifting Device to Wrap Under Pallet
  • Scales