• Fully Automatic: Can be operated from the forklift with wireless remote.
  • Simple & Safe: No need for the operator to attach and cut the film.
  • All Electric: No air requirement or noisy compressors.
  • Affordable: Fits any budget, not much more than a semi-automatic.
The A-Arm technology is available in a fully automated conveyorized system that will reduce labor costs at a very affordable price.
Request Information
Unit of Measure
Items
Model LP-SWA Automatic Switch A Arm Low Profile Stretch Wrappers

Model LP-SWA Automatic Switch A-Arm Low Profile Stretch Wrapper
Model HP-SWA Automatic Switch A-Arm High Profile Stretch Wrapper

Model HP-SWA Automatic Switch A-Arm High Profile Stretch Wrapper
Description N/A
  • Fully Automatic: Can be operated from the forklift with wireless remote.
  • Simple & Safe: No need for the operator to attach and cut the film.
  • All Electric: No air requirement or noisy compressors.
  • Affordable: Fits any budget, not much more than a semi-automatic.
The A-Arm technology is available in a fully automated conveyorized system that will reduce labor costs at a very affordable price. 		N/A A unique patented fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns.
Brands N/A Cousins
Production Speed N/A N/A 1 to 40 loads/hr
Note for Production Speed N/A N/A Process rates will vary with load size, number of wraps & forklift load/unload time.
Maximum Static Load Weight N/A N/A 4500 lb
Maximum Dynamic Load Weight N/A N/A 10000 lb
Maximum Load Length N/A 64 in N/A 67 in
Maximum Load Width N/A 64 in N/A 67 in
Maximum Load Height N/A 75 in
Diagonal Load Size N/A 90 in N/A 96 in
Maximum Load Width to Remain Inboard of the Turntable N/A N/A 48 in
Maximum Load Length to Remain Inboard of the Turntable N/A N/A 48 in
Maximum Load Diagonal Size to Remain Inboard of the Turntable N/A N/A 68 in
Note for Load Capacity N/A N/A Maximum load heigh: plus up to 4" top overlap.
Control Panel Voltage N/A 115 V
Control Panel Phase N/A 1
Control Panel Frequency N/A 60 Hz
Control Panel Current N/A 15 A
Controls N/A
  • 3 machines in 1easy selection for Automatic/semi-automatic/top banding modes.
  • LCD operator interface with diagnostics.
  • Cycle pause & reinforce wrap.
  • Separate up/down spiral speed controls.
  • 3 Separate Wrap Programs .
  • Selectable reduced film tension parameters for wrapping top and/or bottom of light loads.
  • Emergency stop button.
  • Wireless remote cycle start/stop.
  • 3 year warranty on components.
 		N/A
  • Electronic controls with LCD operator interface.
  • Power Off - On - Reset switch & Power On indicator light.
  • Single button Auto Wrap Cycle Start/Pause.
  • Cycle Pause for applying top sheets.
  • Reinforce Wrap control for mid-wrapping.
  • Emergency Stop button.
  • Turntable Jog button.
  • Film Carriage Lower & Raise buttons.
  • Film tension (Force-to-Load) control.
  • Separate film carriage raise & lower speed controls.
  • Operator programmable turntable speed control.
  • Triple beam auto load height sensing photo-eye, detects dark or shiny loads.
  • Separate 1 to 12 revolution top & bottom wrap control.
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load.
  • A - B - C Wrap Program selector with capability to input and store unique wrapping parameters for each program.
  • Wireless remote start/stop control - optional lanyard, pendant or pedestal control station available.
  • 3 wrap modes: automatic spiral wrapping/automatic top banding/semi-automatic.
  • 3 machines in one!.
Turntable Octagonal Size N/A N/A 48 in
Turntable N/A N/A
  • 48" octagonal 5/16" thick formed steel plate turntable.
  • 4 point caster support system.
  • Turntable height less than 11" from floor.
  • ANSI # 50 direct chain drive c/w chain tensioner.
  • 3-12 RPM rotational speed c/w soft start acceleration.
  • 1/2 HP AC variable speed motor.
  • Final revolution deceleration and positive stop alignment.
  • Front & back forklift ports for easy movement.
  • Accu-Count exact turntable positioning system for additional film savings!
Film Carriage Elevator N/A
  • Super Rapid Thread II™ 20" capacity pre-stretch film carriage.
  • Safety Door with auto power cut-off switch.
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside on the load.
  • 1/2 HP AC variable speed motor.
  • 33% to 313% fixed stretch capability.
  • Carriage Descent Safety Shut-Off Device.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers
 		N/A
  • 1/2 HP AC variable speed motor.
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device.
  • Maintenance free carriage guidance system.
Film Delivery System N/A N/A
  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage.
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load..
  • 1/2 HP AC variable speed motor.
  • Fully electronic dynamic dancer corner compensation.
  • 33% to 313% fixed stretch capability.
  • Pre-stretch ratio variable using easy sprocket change.
  • Carriage Descent Obstruction Safety Shut-Off Device.
  • Rapid Thread ™ Safety Door with auto power cut-off switch.
  • Side mounted film carriage for operator convenience and safety.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers.
Tower Design N/A
  • Fully enclosed & guarded motors.
  • No exposed cables.
  • Heavy-duty formed/structural steel.
  • Electro-static powder coated paint finish.
  • 5 year warranty on steel fabrications.
 		N/A
Turntable Capacity N/A 4500 lb N/A
Turntable Diameter N/A 65 in N/A
Low Profile Turntable N/A
  • 1 - 12 RPM with soft start acceleration.
  • 1/2 HP AC variable speed drive.
  • Heavy-duty surround deck.
  • Forklift tubes - front and rear.
  • Maintenance free 48 support wheels.
  • Optional loading ramp 60" long x 48" wide complete with 10" level porch area available.
 		N/A
Features N/A
  • Less film slippage means more consistent stretch and the "sticky" side of the film will always be against both the rubber rollers and the load where it belongs.
  • All AC motors.
  • Cousins smart engineering has developed an advanced cut and hold device, the A-Arm. It provides significant productivity gains and safety benefits. This technology is only available on a Cousins machine.
  • Available in a high profile turntable model with a 48" x 48" deck.
 		N/A
Automation Features N/A N/A
  • "All Electric - No Pneumatics Required".
  • "Patent Pending" Cousins exclusive patent pending A-Arm film cut and hold device starts and ends the wrap process at the top of the load. This uniquely different approach to attaching and cutting the stretch film provides you with these benefits:.
  • Selectable top banding capability.
  • Stabilizes the load early in the wrap cycle.
  • Places the ending film tail at the top of the load instead of the bottom.
  • There is no film clamp on the turntable that can be damaged by debris or operator error - also eliminates the need for slip-rings to supply power onto the turntable for less maintenance.
  • Load placement on the turntable is not critical.
  • No air hook-ups or noisy compressors.
  • Automatic First Revolution Load Scanning Safety Feature detects uneven or partial stacked top layers and automatically adjusts A-Arm height clear of obstructions.
  • A-Arm Anti-Fall Safety Device.
Structural Features N/A N/A
  • All structural steel construction.
  • Forklift truck portable base structure design - lifting tubes included for front and rear access.
  • Structural steel tube machine tower with sheet metal covers.
  • Electro-static powder coated