Request Information
The HP-3200 is All Electric No air requirement or noisy air compressors.

A unique patented fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns.
Unit of Measure

Specifications

Brands

 N/A Cousins

Production Speed

 N/A 1 to 40 loads/hr

Note for Production Speed

 N/A Process rates will vary with load size, number of wraps & forklift load/unload time.

Turntable Octagonal Size

 N/A 52 in

Load Capacity

Maximum Dynamic Load Weight

 N/A 4500 lb

Maximum Static Load Weight

 N/A 10000 lb

Maximum Load Width

 N/A 50 in

Maximum Load Length

 N/A 50 in

Maximum Diagonal Load Size

 N/A 71 in
Maximum Load Height1 N/A 80 in

Minimum Load Width

 N/A 30 in

Minimum Load Length

 N/A 30 in

Minimum Load Height

 N/A 24 in

Turntable

Turntable

 N/A
  • 52" octagonal 5/16" thick formed steel plate turntable.
  • 4 point caster support system.
  • Turntable height less than 12" from floor.
  • ANSI #50 direct chain drive c/w chain tensioner.
  • 3-12 RPM rotational speed c/w soft start acceleration.
  • 1/2 HP AC variable speed motor.
  • Final revolution deceleration and positive stop alignment.
  • Front & back forklift ports for easy movement.

Film Carriage Elevator

Film Carriage Elevator

 N/A
  • 1/2 HP AC variable speed motor.
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device.
  • Maintenance free carriage guidance system.

Film Delivery System

Film Delivery System

 N/A
  • NEW Super Rapid Thread II ™ 20" capacity pre-stretch film carriage.
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP AC variable speed motor.
  • Fully electronic dynamic dancer corner compensation.
  • 33% to 313% fixed stretch capability.
  • Pre-stretch ratio variable using easy sprocket change.
  • Carriage Descent Obstruction Safety Shut-Off Device.
  • Rapid Thread ™ Safety Door with auto power cut-off switch.
  • Side mounted film carriage for operator convenience and safety.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers.

Electrical Input Requirements

Voltage

 N/A 115 V

Phase

 N/A 1

Frequency

 N/A 60 Hz

Current

 N/A 15 A

Automation Features

Automation Features

 N/A
  • "All Electric - No Pneumatics Required".
  • Electro-mechanically actuated film clamp mechanism.
  • Electro-mechanically actuated film tail cut/wipe arm mechanism.
  • Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle.

Controls

Control Features

 N/A
  • Panasonic PLC with Touchscreen Operator Interface.
  • Power Off - On - Reset switch & Power On indicator light.
  • Single button Auto Wrap Cycle Start/Pause.
  • Cycle Pause for applying top sheets.
  • Reinforce Wrap control for mid-wrapping.
  • Emergency Stop button.
  • Turntable Jog button.
  • Film Carriage Lower & Raise buttons.
  • Film Clamp Open/Close button.
  • Film tension (Force-to-Load) control.
  • Separate film carriage raise & lower speed controls.
  • Variable turntable speed control.
  • Triple beam auto load height sensing photo-eye, detects dark or shiny loads.
  • Separate 1 to 12 revolution top & bottom wrap control.
  • Selectable Reduced Bottom Film Force parameter for wrapping bottom of load.
  • A - B - C Wrap Program selector with capability to input and store unique wrapping parameters for each program.
  • Wireless remote start/stop control – optional lanyard, pendant or pedestal control station available.
  • NEMA 12 control panel enclosure.
  • Non-proprietary UL/CSA approved components.

Structural Features

Structural Features

 N/A
  • All structural steel construction.
  • Forklift truck portable base structure design - lifting tubes included for front and rear access.
  • Structural steel tube machine tower with sheet metal covers.
  • Electro-static powder coated
  • 1 Plus up to 4" top overlap.