DESIGNED FOR MAXIMUM PRODUCTIVITY
The ERX-15 is an automatic case erector designed to efficiently form and seal the bottom of corrugated cases in a single pass.

INCREASE YOUR PRODUCTION
The ERX-15 Case Erector from EASTEY® is designed to automatically erect and seal the bottom of your cases at production rates up to 15 cases per minute. The ERX-15 is designed to keep production and maintenance efforts at a minimum while providing fast, efficient case erecting, making the ERX-15 an idealmore
Unit of Measure

Specifications

Brands

 EASTEY®

Speed

 Up to 15 Cases a minute

Case Types

 RSC RH

Flute Types

 B-Flutes

Flute Size

 3 mm

Wall Types

 Single

Case Sealing

 2 in. Wide Pressure Sensitive Tape, Optional 3 in. Wide

Case Hopper Capacity

 150 to 200 Cases (200 Cases with B-Flutes)

Air Pressure at 12 Cubic Foot Per Minute (ft³/min) Air Flow

 80 psi

Construction Material

 Heavy Duty Steel

Machine Dimensions

Machine Length

 94.3 in

Machine Width

 82 in

Machine Height

 82.8 in

Electrical Requirements

Voltage

 110 V

Frequency

 50 Hz60 Hz

Phase

 1

Box Specifications

Minimum Box Length

 7 in

Minimum Box Width

 5 in

Minimum Box Depth

 5 in

Maximum Box Length

 19.5 in

Maximum Box Width

 15.5 in

Maximum Box Depth

 19.5 in

Additional Information

Additional Information

 OPERATION MADE EASY
The ERX-15 Case Erector enables a single operator to form, seal, and pack corrugate cases. Operation is simple: load up to 200 cases in the case magazine hopper and set your operation to run or jog mode. Separators release the leading blank case where a series of eight vacuum suction cups hold the case in a properly formed square position. After a set of stationary flap folding bars fold both minor and major bottom flaps, the case is then transitioned and the bottom is sealed with EASTEY®'s proven EX tape head.

WIDE STANDARD CASE RANGE
The versatile design of the ERX-15 allows operators the flexibility of making adjustments on the fly without tools and easy-to-use hand tighten knobs and cranks. Need to switch case sizes? No problem, case changeover is completed in minutes for a wide range of cases as large as 19.5" in length, 19.5" in height, and 15.5" in width.

INDUSTRIAL STRENGTH OPERATION
Dual 1/4 HP side drive motors, eight precise double vacuum powered suction cups, and aggressive industrial strength drive belts make ERX-15 a workhorse that will stand up to your toughest challenges. Each case erector is made from steel with a powder coated exterior to protect the ERX-15 from abusive industrial conditions and ensure years of use.

INCREASE YOUR ROI
Use of EASTEY®'s ERX-15 case erector can be learned in minutes, avoiding costly breaks in production and downtime. Better yet, ERX-15 will eliminate slow production rates associated with manual case forming and taping, and repurpose your labor force where they can be utilized more effectively.

USER FRIENDLY
Single user operation and standard features like touch input HMI, low case and low tape alarms, powered case magazine, and simple case adjustments and changeovers, make the ERX-15 an operator-friendly addition to your packaging line.

THE RIGHT SOLUTION
Rugged design. Reliability. Simple operation. Your benefits go on and on. When it comes to industrial operation, rely on EASTEY® to provide the right solution for your case erecting needs.

Features

Features
  • Touchscreen human interface control panel
  • Powered case magazine hopper holds up to 200 cases
  • Square case erecting and transition area
  • Quick and easy changeover requires no tools - 5 easy steps
  • Low tape and low case alarm light
  • E-Stop and interlock guarding for safety
  • Optional 3" tape head available

Key Features

Key Features
  1. Large Magazine Hopper
    Large capacity blank magazine hopper holds up to 200 RSC cases. Replenish cases while machine is in operation.
  2. Industrial Strength Pickup Frame
    The case drop down area releases only the leading case in preparation to transition from flat to open.
  3. Vacuum Suction Cups
    A series of eight double vacuum suction cups open the leading panels of the RSC to a precise square position and hold the case securely.
  4. Minor Flap Folding Bars
    A set of flap folding bars fold the bottom minor flaps.
  5. Major Flap Folding Bars
    The bottom major flaps are folded to lock the case in the square or rectangle position.
  6. Case Sealing
    A pusher bar guides the case toward industrial strength side belts and the proven reliable EX tape head ensures a quality center seal.