Print Back
For gentle transport - up or down.

Inclined and horizontal conveyors are manufactured and combined according to requirements.
Unit of Measure

Specifications

Brands

N/A SOCO
Standard Conveying Gear (40:1)1 N/A 10 m/min

Frames

N/A Electro-Galvanized Steel

Dimensions

Width

N/A 300 mm
Conveyor Length (L1)2 N/A 2500 mm

Booster Length (L2)

N/A 1.0 m

Accessories

Accessories

N/A Supports for Belt Conveyors and Driven Roller Conveyors

Additional Information

Additional Information

N/A Belt
As standard, the booster is fitted with a smooth belt and the conveyor with a grip belt. 0.5 m long boosters wider than 400 mm are always delivered with belts with guide profile.

Contact our sales department regarding food belts and other belt types.

Bedding
As standard, 0.5 m long and 400 mm wide boosters are supplied with grooved plate bedding. Conveyors and boosters of 1 m are supplied with roller bedding.

Contact our sales department if another bedding is required.

Ordering
Choose a booster of the desired width and length (the booster is the horizontal conveyor).

Then choose the length of the incline conveyor. The item number is stated under the booster.

Then choose the belt.

Ideal for wide transfer angles.

Note

Note

N/A A minimum of three supports is required for a conveyor with booster.

As standard, the motor is fitted on the left side of the booster. For mounting on the other side, please specify this upon ordering.

Subject to alteration.
  • 1 Other gearings available. A frequency control system can be connected direct to the 3-phase motor.
  • 2 The booster is available in lengths of 0.5 m and 1.0 m. The conveyor is available in lengths up to 10 m. For lengths over 5 m, please contact our sales department.