Item # 49.0213, Model P357/12,7/0.65-1.05/1.3 Pneumatic and Sealless Plastic Strapping Tensioner On TPC Packaging Solutions, TAPE Products Company

Request Information

Pneumatic strapping tool, for Manual (2 button) or Semi-Automatic (1 button) operation.

Unit of Measure

Specifications | Strapping Dimensions | Tool Dimensions | Advantages and Benefits

Brands	N/A FROMM
Model	N/A P357/12,7/0.65-1.05/1.3
Strapping Qualities	N/A Polyester (PET) and Polypropylene (PP) plain and embossed.
Maximum Strap Tension	N/A 1300 N292 lb
Tension Speed	N/A 165 mm/s6.4 in/s
Weight¹	N/A 5.7 kg12.6 lb
Seals	N/A Sealless, Friction weld sealing
Approximate Average Seal Strength²	N/A 75 %
Maximum Air Pressure	N/A 5.5 to 6.0 bar80 to 87 psi
Air Consumption	N/A 2.1 ft³/min60 nL/min
Maximum Pressure Drop	N/A 0.5 bar7.25 psi
Version	N/A Manual Semi-Automatic
Suspension Bracket	N/A Supplied with the Tool
Replaces	N/A P355

Strapping Width	N/A 12.7 mm1/2 in
Strapping Thickness	N/A 0.65 to 1.05 mm0.025 to 0.041 in

N/A

Single hand operation tool.
Select the operation mode that best fits to your job: manual (2-buttons) or semi-automatic (1-button).
Easy strap threading - both straps are inserted together.
Strap tension can be set and blocked for correct and consistent secured packages.
Seal time is easy to adjust, to get the best possible seal efficiency.
To warrant an optimal seal cooling time, the signalization pin shows you the end of each strapping cycle.
Pneumatically powered, very reliable and maintenance-friendly.
This tool is ideal for a wide variety of vertical and horizontal strapping positions, suitable for almost all applications in various industries.
The perfect solution in case electrical powered tools, for safety or technical reasons, must not or cannot be used.
The compressed air, can be connected to the tool either on top of the main housing or at the rear end.
For packages with a rough and hard surface, a bottom-base wearing plate is available as accessory.
In cases where soft packages are to be strapped, a plastic bottom-base protection plate is available.

Brands