Unit of Measure

Specifications

Brands

N/A Cousins

Turntable Diameter

N/A 57 in

Turntable Height from Floor

N/A 2.75 in

Production Speed

Production Speed

N/A Up to 35 loads/hr

Note for Production Speed

N/A Process rates will vary with load size, number of wraps & forklift load/unload time.

Load Capacity

Maximum Load Capacity

N/A 4000 lb

Maximum Load Length

N/A 50 in

Maximum Load Width

N/A 50 in

Maximum Load Height

N/A 80 in

Maximum Diagonal Load Size

N/A 71 in

Note for Load Capacity

N/A Maximum load size to safely clear the tower. Plus up to 4" top film overlap.

Electrical Input Requirements

Control Panel Voltage

N/A 115 V

Control Panel Phase

N/A 1

Control Panel Frequency

N/A 60 Hz

Control Panel Current

N/A 15 A

Note for Electrical Input Requirements

N/A With dedicated service

Turntable

Turntable

N/A
  • 57" Diameter laser-cut steel plate with surround deck protection
  • Maintenance free - roller bearing support
  • Turntable height 2.75" from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • Between 3 and 12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!
  • Optional loading ramp for pallet jack use available

Film Carriage Elevator

Film Carriage Elevator

N/A
  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device.

Film Delivery System

Film Delivery System

N/A
  • 20" capacity pre-stretch film carriage.
  • Safety door for easy film threading.
  • Safety shut-off when machine is at rest.
  • 1/2 HP AC variable speed motor.
  • Fully electronic dynamic dancer corner compensation.
  • 33% to 300% fixed stretch capability.
  • Pre-stretch ratio variable using easy sprocket change.
  • Carriage descent obstruction safety shut-off device.
  • Side mounted film carriage for operator convenience and safety.

Controls

Control Features

N/A
  • Electronic controls with LCD operator interface
  • Power Off - On - Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Film Feed button with feed duration timer
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Programmable turntable speed control
  • Automatic load height detection sensor
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
  • Cycle counter
  • A - B - C wrap program selector with capability to input and store unique wrapping parameters for each program
  • Password Protection - The wrap program selection and wrap program setting can be password protected when ordered from the factory (must be specified on the PO)

Structural Features

Structural Features

N/A
  • All structural and formed steel construction
  • Forklift truck portable base structure design - lifting tubes included for front and rear access
  • Electro-static powder coated paint finish