• Fully Automatic: Can be operated from the forklift with wireless remote.
  • Simple & Safe: No need for the operator to attach and cut the film.
  • All Electric: No air requirement or noisy compressors.
  • Affordable: Fits any budget, not much more than a semi-automatic.
The A-Arm technology is available in a fully automated conveyorized system that will reduce labor costs at a very affordable price.
Unit of Measure

Specifications

Brands

N/A Cousins

Turntable Capacity

N/A 4500 lb

Turntable Diameter

N/A 65 in

Load Capacity

Maximum Load Length

N/A 64 in

Maximum Load Width

N/A 64 in

Maximum Load Height

N/A 75 in

Diagonal Load Size

N/A 90 in

Electrical Input Requirements

Control Panel Voltage

N/A 115 V

Control Panel Phase

N/A 1

Control Panel Frequency

N/A 60 Hz

Control Panel Current

N/A 15 A

Controls

Controls

N/A
  • 3 machines in 1easy selection for Automatic/semi-automatic/top banding modes.
  • LCD operator interface with diagnostics.
  • Cycle pause & reinforce wrap.
  • Separate up/down spiral speed controls.
  • 3 Separate Wrap Programs .
  • Selectable reduced film tension parameters for wrapping top and/or bottom of light loads.
  • Emergency stop button.
  • Wireless remote cycle start/stop.
  • 3 year warranty on components.

Film Carriage Elevator

Film Carriage Elevator

N/A
  • Super Rapid Thread II™ 20" capacity pre-stretch film carriage.
  • Safety Door with auto power cut-off switch.
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside on the load.
  • 1/2 HP AC variable speed motor.
  • 33% to 313% fixed stretch capability.
  • Carriage Descent Safety Shut-Off Device.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers

Tower Design

Tower Design

N/A
  • Fully enclosed & guarded motors.
  • No exposed cables.
  • Heavy-duty formed/structural steel.
  • Electro-static powder coated paint finish.
  • 5 year warranty on steel fabrications.

Low Profile Turntable

Low Profile Turntable

N/A
  • 1 - 12 RPM with soft start acceleration.
  • 1/2 HP AC variable speed drive.
  • Heavy-duty surround deck.
  • Forklift tubes - front and rear.
  • Maintenance free 48 support wheels.
  • Optional loading ramp 60" long x 48" wide complete with 10" level porch area available.

Features

Features

N/A
  • Less film slippage means more consistent stretch and the "sticky" side of the film will always be against both the rubber rollers and the load where it belongs.
  • All AC motors.
  • Cousins smart engineering has developed an advanced cut and hold device, the A-Arm. It provides significant productivity gains and safety benefits. This technology is only available on a Cousins machine.
  • Available in a high profile turntable model with a 48" x 48" deck.