• Design features/adjustments that eliminate film breaks reducing downtime.
  • A quality machine built with quality components and supported by a local qualified distributor.
Unit of Measure

Specifications

Brands

 Cousins

Production Speed

Production Speed

 1 to 45 loads/hr

Note for Production Speed

 Process rates will vary with load size, number of wraps & conveyor speed.

Load Capacity

Maximum Load Capacity

 4000 lb

Maximum Load Length

 52 in

Maximum Load Width

 52 in

Maximum Load Height

 80 in

Minimum Load Height

 24 in

Note for Load Capacity

 Larger load size options are available.

Conveyors

Rollers Diameter on 3 Inch (in) Centers

 2.5 in

Effective Roller Width

 54 in

Conveyors Standard Passline Height

 18

Conveyors

 Standard system includes 5' infeed and 5' outfeed powered conveyors.

Film Carriage Elevator

Film Carriage Elevator
  • Super Rapid Thread II pre-stretch film carriage.
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside on the load.
  • 1/2 HP DC variable speed motor.
  • 33% to 313% fixed stretch capability.
  • Carriage Descent Safety Shut-Off Device.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers.

Controls

Controls
  • Panasonic FP-X PLC HMI touchscreen operator interface panel.
  • Wrap Bypass mode selector switch.
  • Separate film carriage elevator raise & lower speed controls.
  • Separate 1 to 12 revolution top & bottom wrap control.
  • Broken film/out of film detection c/w automatic machine reset and fault beacon light.
  • Rotary arm and film carriage elevator dynamic braking.
  • NEMA 12 control panel and junction boxes Dust tight slip ring assembly.
  • Non-proprietary UL/CSA approved components.
  • 3 year warranty on components.

Turntable/Tower Design

Turntable/Tower Design
  • Heavy-duty ring bearing - gear/pinion drive 1 - 15 RPM 1 HP DC variable speed motor.
  • Dust tight slip ring assembly.
  • Final revolution deceleration and positive stop alignment.
  • Heavy-Duty Formed/Structural Steel.
  • Electro-static powder coated paint finish.
  • 5 Year Warranty on Steel Fabrications

Features

Features
  • Stacked lights monitor system operation and faults.
  • PLC: Panasonic FP-X.
  • Safety rail fencing with interlocked gate.
  • Long lasting electro-static powder coat paint process.
  • Soft start VAC controls and automatic load staging photo-eyes.
  • Ring gear bearing turntable support.
  • Super Rapid Thread II power pre-stretch film carriage.
  • HD structural steel construction.

Additional Information

Additional Information

 Your system can be equipped with any device that the application requires
  • Additional Conveyors
  • Automatic Top Sheet Dispensers
  • Top Platen/Hold Down Device
  • 90º Transfers
  • Heat Seal Device to Secure Film Tails
  • Turntables
  • Frame Extensions for Larger Load Sizes
  • Non-standard PLC/Controls
  • Lifting Device to Wrap Under Pallet
  • Scales