TPC Packaging Solutions
TPC Packaging Solutions
Phone: (513) 489-8840
Toll Free: (800) 543-4930
Fax: (513) 489-4616
Website: https://tpcpack.com/
Headquarters
11630 Deerfield Rd.
Cincinnati, OH 45242
Illinois
1401 Davey Road. Suite 800
Woodridge, IL 60517
Florida
7803 Southland Blvd, Suite 204
Orlando, FL 32809
Texas
901 Parkway Dr
Grand Prairie, TX 75051
Print Back
Unit of Measure

Specifications

Brands

 N/A Cousins

Turntable Diameter

 N/A 57 in

Turntable Height from Floor

 N/A 2.75 in

Production Speed

Production Speed

 N/A Up to 35 loads/hr

Note for Production Speed

 N/A Process rates will vary with load size, number of wraps & forklift load/unload time.

Load Capacity

Maximum Load Capacity

 N/A 4000 lb

Maximum Load Length

 N/A 50 in

Maximum Load Width

 N/A 50 in

Maximum Load Height

 N/A 80 in

Maximum Diagonal Load Size

 N/A 71 in

Note for Load Capacity

 N/A Maximum load size to safely clear the tower. Plus up to 4" top film overlap.

Electrical Input Requirements

Control Panel Voltage

 N/A 115 V

Control Panel Phase

 N/A 1

Control Panel Frequency

 N/A 60 Hz

Control Panel Current

 N/A 15 A

Note for Electrical Input Requirements

 N/A With dedicated service

Turntable

Turntable

 N/A
  • 57" Diameter laser-cut steel plate with surround deck protection
  • Maintenance free - roller bearing support
  • Turntable height 2.75" from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • Between 3 and 12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!
  • Optional loading ramp for pallet jack use available

Film Carriage Elevator

Film Carriage Elevator

 N/A
  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device.

Film Delivery System

Film Delivery System

 N/A
  • 20" capacity pre-stretch film carriage.
  • Safety door for easy film threading.
  • Safety shut-off when machine is at rest.
  • 1/2 HP AC variable speed motor.
  • Fully electronic dynamic dancer corner compensation.
  • 33% to 300% fixed stretch capability.
  • Pre-stretch ratio variable using easy sprocket change.
  • Carriage descent obstruction safety shut-off device.
  • Side mounted film carriage for operator convenience and safety.

Controls

Control Features

 N/A
  • Electronic controls with LCD operator interface
  • Power Off - On - Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Film Feed button with feed duration timer
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Programmable turntable speed control
  • Automatic load height detection sensor
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
  • Cycle counter
  • A - B - C wrap program selector with capability to input and store unique wrapping parameters for each program
  • Password Protection - The wrap program selection and wrap program setting can be password protected when ordered from the factory (must be specified on the PO)

Structural Features

Structural Features

 N/A
  • All structural and formed steel construction
  • Forklift truck portable base structure design - lifting tubes included for front and rear access
  • Electro-static powder coated paint finish