Supports for external mounting offer high durability and stability and are also recommended for heavy-duty purposes.

Different models make it possible to achieve the desired operational height.

Supports for internal mounting are recommended where space does not allow external mounting.

Supports for internal mounting are not recommended for heights exceeding 350 mm.

Compulsory for heights exceeding 350 mm.

To guide pallets.

To order as complete side supports:

1. State the required number of guide rail support units.
2. State the required guide rail length in mm.

For empty pallets of different sizes.

Recommended for guiding the center part of the pallet during transportation.

Two guide rail supports are required for each guide rail.

To order as complete side supports:

1. State the required number of guide rail support units.
2. State the required guide rail length in mm.

Prevents pallets from over-running the edge of the end of the conveyor.

Universal model for all heights.

Available for RP 178 only.

Recommended for accurate stopping of empty pallets.

The advantage is correct positioning of pallets for palletizing.

Used for speed reduction on non-driven conveyors.

For mounting of photocells and reflectors on roller conveyors and chain conveyors.

Prevents fork-lift damage to conveyor.

Prevents conveyors from being damaged by fork-lift trucks.

Used in all pallet collection areas.

Recommended truck guard height is 25 mm above roller height.

For mounting on the side or at the end of a conveyor

Prevents a fork-lift from driving into the conveyor.

Used for support in connection with pallet transfer from rotary table or pallet wrapper to pallet roller conveyor.

This type can only be used for RP 178 mm.

The rollers are ordered separately.

One set per conveyor consists of one right and one left unit.

Used for support in connection with pallet transfer from rotary table or pallet wrapper to pallet roller conveyor.

This type can only be used for RP 178 mm.

The supports are ordered separately.

One set per conveyor consists of one right and one left unit.

Used for support in connection with pallet transfer from rotary table or pallet wrapper to pallet roller conveyor.

This type can only be used for RP 178 mm.

The supports are ordered separately.

One set per conveyor consists of one right and one left unit.

Complete packing table with plastic laminated plate.

Easy to hook onto the side of a roller conveyor.

The tables are available with or without case holder.